The best way to learn how to wakeboard or water ski!

This Deluxe Straight Boat Boom made by Barefoot International fits any inboard and outboard competition ski boats with a side windshield frame forward of a non-tapered pylon. This boat boom utilizes a dual stainless steel cable system and runs to the attachment point at the bow. Built with the finest materials, this boom will not damage your boat. Unlike other wakeboard tower booms this straight boom does not have any levers or moving parts that can loosen or break during use. Each clamp is extremely strong and comes with heavy duty mounting hardware. Also included are quick release pins that make it very easy to attach and detach this Barefoot International Boat Boom.

Are you concerned about these wakeboard tower booms fitting your boat?

Our Tower Boom was designed to fit most tubular wakeboard towers. These towers all have a different O.D. (outer diameter) which determines the part number of the correct Tower Boom. The Illusion Tower found on some Malibu boats is the only tower that it cannot be installed on.

How do you setup your wakeboard tower boom?

When you install your wakeboard tower boom you should slightly angle the wakeboard boom forward. This will allow skier out of the side spray from the boat. If there will be several different people using the boom, its level should be adjusted to chest high of an average height person. From this point it will be easier to adjust up for taller wakeboarder or waterskiers, and down for smaller users such as kids by shifting the weight distribution (people or fatsacs) in the boat.

Wakeboard Tower Boom Tip:

Keep a small tube of clear silicone grease in the boat and apply a light coat to the hitch pins on a regular basis. This will help with installation and removal of the pins.